1. Regulatory documentation canceled in 2020-2021
  2. Regulatory documentation for Instrumentation and control
  3. Regulatory documentation for security requirements
  4. Regulatory documentation for documentation
  5. Regulatory documentation for cable products
  6. Regulatory documentation for control and measuring devices
  7. Regulatory documentation on metrology
  8. Regulatory documentation on fire systems and gas systems
  9. Regulatory documentation by technology

1. Regulatory documentation canceled in 2020-2021

GOST 22483-2012GOST 22483-2012. Copper and aluminum conductors for cables, wires and cords.The application of GOST 22483-2012 on the territory of the Russian Federation is terminated from 01.09.2021. Instead, from 01.09.2021, GOST 22483-2021 is put into effect on the territory of the Russian Federation (Rosstandart order No. 349-st of 14.05.2021, IUS 8-2021).
GOST Р 21.1101-2013System of design documents for construction. Main requirements for design and working documents
GOST-12.1.044- 2018System of design documents for construction. Main requirements for design and working documents
IEC 60189 — 2007.с 1 по 7Low-frequency cables and wires with PVC insulation and PVC sheath
ПБ 03-581-03Rules for the design and safe operation of stationary compressor units, air and gas pipelines. Inactive. Cancelled from January 1, 2021 on the basis of the decree of the Government of the Russian Federation of August 6, 2020 N 1192.
ПБ 03-582-03Rules for the design and safe operation of compressor units with reciprocating compressors operating on explosive and harmful gases. Inactive. Cancelled from January 1, 2021 on the basis of the decree of the Government of the Russian Federation of August 6, 2020 N 1192.
Government regulations RF № 246 от 06.04.2011 года N 246On the implementation of the Federal State metrological supervision. Expired on July 1 , 2021 on the basis of the decree of the Government of the Russian Federation of June 29 , 2021 N 1053.
Government regulations RF N 1521 от 26.12.2014On approval of the list of national standards and codes of rules (parts of such standards and codes of rules), as a result of the application of which compliance with the requirements of the Federal Law «Technical Regulations on the Safety of Buildings and Structures» is ensured on a mandatory basis. Expired on August 1, 2020 on the basis of the decree of the Government of the Russian Federation of July 4, 2020 N 985.
Order of the Ministry of Labor and Social Protection of the Russian Federation from 24.07.2013 №328нПравила по охране труда при эксплуатации электроустановок. Недействующий.
Утратил силу с 1 января 2021 года на основании приказа Минтруда России от 15 декабря 2020 года N 903н.
Rostechnadzor Order from № 125 от 29.03.2016Federal norms and rules in the field of industrial safety «Safety rules for oil and gas processing industries. Cancelled from January 1, 2021 on the basis of a decree of the Government of the Russian Federation.
Rostechnadzor Order from №96 от 11.03.2013Rostechknadzor Order N°96 dd 11/03/2013
«Federal rules and regulations in the field of
industrial safety «General rules of explosion
safety of fire and explosion hazardous chemical,
petrochemical and oil refining industries
Rostechnadzor Order from 25.03.2014 N 116.Rostechknadzor Order N°116 dd 25/03/2014 «Federal rules and regulations in the field of industrial safety «Industrial safety rules of
hazardous plants with equipment under overpressure”. Canceled from January 1, 2021 on the basis of the decree of the Government of the Russian Federation of August 6, 2020 N 1192.
СанПиН 2.2.2/2.4.1340-03Hygienic requirements for personal electronic computers and work organization. Cancelled from January 1, 2021 on the basis of the decree of the Government of the Russian Federation of 08.10. 2020 N 1631.
СанПиН 2.2.4.548-96 Hygienic requirements for the microclimate of industrial premises. Cancelled on 03.11.2021.
SP 18.13330.2011. General plans of industrial enterprises. Does not work. Replaced by the Decree of the Government of the Russian Federation No. 985 of 04.07.2020, the Decree of the Government of the Russian Federation No. 1521 of 26.12.2014 was declared invalid .
SP 5.13130.2009. Fire protection systems. Fire alarm and fire extinguishing installations are automatic. Norms and rules of design. Cancelled from 01.03. 2021.
SP 52.13330.2011. Natural and artificial lighting. Does not work. Replaced. By the Decree of the Government of the Russian Federation No. 985 dated 04.07.2020 . The Decree of the Government of the Russian Federation No. 1521 of  26.12. 2014 was declared invalid .
SP 6.13130.2013:Fire protection systems. Electrical equipment. Fire safety requirements (recognized as not applicable from 06.10.2021 in connection with the entry into force of SP 6.13130.2021.The order of the Ministry of Emergency Situations of Russia dated 06.04.2021 N 200).

2. Regulatory documentation for Instrumentation and control

FZ от 08.07.2006 №149-FZAbout information, information technologies and information protection
FZ от 26.07.2017 №187-FZFederal Law No. 187-FZ of 26.07.2017. On the security of the critical information infrastructure of the Russian Federation.
FZ от 26.07.2017 №193-FZOn Amendments to Certain Legislative Acts of the Russian Federation in connection with the adoption of the Federal Law «On the Security of the Critical Information Infrastructure of the Russian Federation»
RF Government Ordinance от 17.02.2018 №162On the approval of the Rules for the implementation of state control in the field of ensuring the security of significant objects of the critical information infrastructure of the Russian Federation.
«FSTEC order от 14 марта 2014 г. № 31 «Federal Service for Technical and Export Control Order No. 31 of March 14, 2014”: On Approval of the Requirements for Ensuring Information Security in Automatic Process Control Systems at Mission-Critical Facilities, Potentially Hazardous Facilities, and Facilities Posing an Elevated Hazard to Human Life and Health and the Environment.
FSTEC order от 14.03.2014 №31On approval of the Requirements for ensuring the protection of information in automated control systems for production and technological processes at critical facilities, potentially dangerous facilities, as well as facilities that pose an increased danger to human life and health and to the environment.
FSTEC order от 21.12.2017 №235On approval of Requirements for the creation of security systems for significant objects of the critical information infrastructure of the Russian Federation and ensuring their functioning
FSTEC order от 25.12.2017 №239Requirements for ensuring the security of significant objects of the critical information infrastructure of the Russian Federation
FSTEC order от 27.03.2019 №64On Amendments to the Requirements for the Creation of Security Systems for Significant Objects of the Critical Information Infrastructure of the Russian Federation and Ensuring their Functioning, approved by Order No. 235 of the Federal Service for Technical and Export Control of December 21, 2017.
GOST 21552-84Computer equipment. General technical requirements, acceptance, test methods, marking, package, transportation and storage.
GOST 21889-76 Man-machine system. Operator’s arm-chair. General ergonomic requirements.
GOST 21958-76Man-machine system. Operator’s rooms and cabins. General ergonomic requirements for operators relative position.
GOST 22261-94 Instruments for Measuring Electric and Magnetic quantities.
GOST 22269-76 Man-machine system. Operator’s workplace. Arrangement of workplace elements. General ergonomic requirements
GOST 23000-78Man-machine system. Control consoles. General ergonomic requirements
GOST 24.104-85Unified system of standards of computer control systems. Computer control systems. General requirements (Replaced in part of section 3).
GOST 24.701-86 Reliability of automation control system.
GOST 25861-83Computers and data processing systems.
Electrical and mechanical safety requirements and test methods
GOST 25861-83 Computing machine and data processing systems. Mechanical and electrical requirements and test methods.
GOST 27818-88Computers and data processing systems. Admissible noise emission levels at workstations and methods for determination.
GOST 29073-91 Electromagnetic compatibility for industrial process measurement and control equipment. Immunity to electromagnetic disturbance. General introduction;
GOST 30804.4.2-2013Electromagnetic compatibility of technical equipment. Immunity to electrostatic discharge. Requirements and test methods
GOST 30804.4.3-2013Electromagnetic compatibility of technical equipment. Radiated, radio-frequency, electromagnetic field immunity. Requirements and test methods
GOST 30804.6.2-2013Electromagnetic compatibility of technical equipment. Immunity of technical equipment intended for use in industrial environments. Requirements and test methods
GOST 30804.6.2-2013 (МЭК 61000-6-2:2006) Electromagnetic compatibility of technical equipment. Immunity of technical equipment intended for use in industrial environments. Requirements and test methods.
GOST 30804.6.4-2013 (IEC 61000-6-4:2005)Electromagnetic compatibility of technical equipment. Electromagnetic disturbance from technical equipment intended for use in industrial environments. Limits and test methods
GOST 30805.22-2013Electromagnetic compatibility of technical equipment. Information technology equipment. Radio disturbance. Limits and methods of measurements
GOST 34.003-90 Information technology. Set of standards for automated systems. Terms and definitions.
GOST 34.201-89 Information technology. Set of standards for automated systems. Types, packages and identification codes of documents for automated system development.
GOST 34.601-90 Information Technology. Set of Standards for Automated Systems. Automated Systems. Stages of Development.
GOST 34.602-89 Information Technology Set of Standards for Automated Systems. Technical Directions for Automated System Making.
GOST 34.603-92 Information Technology. Types Tests Automated Systems.
GOST 51317.4.3-99Electromagnetic compatibility of technical equipment. Radiated, radio-frequency, electromagnetic field immunity. Requirements and test methods.
GOST CISPR 24-2013Electromagnetic compatibility of technical equipment. Information technology equipment. Immunity to electromagnetic disturbances. Requirements and test methods
GOST IEC 60447-2015Basic and safety principles for man-machine interface, marking and identification. Actuating principles
GOST IEC 60950-1-2014Information technology equipment. Safety. Part 1. General requirements
GOST R 50462-2009(МЭК 60446:2007)Basic and safety principles for human-machine interface, marking and identification. Color and
digital identification of conductors.
GOST R 50571.22-2000
 Electric installation of buildings. Part 7. Requirements for special installations. Section 707. Grounding of data processing hardware.
GOST R 50571.5.54-2013Low-voltage electrical installations  Part 5-54: Selection and erection of electrical equipment. Earthing arrangements, protective conductors and protective bonding conductors
GOST R 50923-96Displays. Operator workplace. General ergonomic requirements and
in-plant environment requirements. Measurement methods.
50948-2001. GOST R 50948-2001 Individual displays. General ergonomic and safety requirements.
GOST R 50948-2001Display means for individual use. General ergonomic requirements and
safety requirements
GOST R 51317.1.2-2007
(МЭК 61000-1-2:2001), GOST IEC 61000-4-5-2017, GOST R МЭК 61000-6-7-2019. 
Electromagnetic compatibility of technical equipment. Methodology for the achievement of the functional safety of technical equipment with regard to electromagnetic disturbance
GOST R 51318.11-99Electromagnetic compatibility of technical equipment.
Radio disturbance from industrial, scientific, medical and domestic (ISMD)
radio-frequency equipment. Limits and test methods
GOST R 51318.14.1-99 (СИСПР 14-1-93)Electromagnetic compatibility of technical equipment. Radio disturbance from household appliances, electric tools and similar apparatus. Limits and test methods.
GOST R 51583-2014 Procedure for developing secure automated systems.
GOST R 51841-2001Programmable controllers. General technical requirements
and test methods.
GOST R 52931-2008 Control and monitoring Process – General Specification.
GOST R 53246-2008Information technologies. Structured cabling systems. Main system elements design. General requirements
GOST R МЭК 60073-2000 Basic and Safety Principles for Man-Machine Interface, Marking and Identification. Coding Principles for Indication Devices and Actuators.
GOST R МЭК 61508-2-2012Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 2. Requirements for systems
GOST R МЭК 61511-1-2018  Functional safety. Safety instrumented systems for the
industrial proceses.
GOST R МЭК 61511-3-2018Functional safety. Safety instrumented systems for the process industry sector. Part 3. Guidelines for the determination of the required safety integrity levels
GOST R МЭК 62061-2015Safety of machinery — Functional safety of safety-related electrical, electronic and programmable electronic control systems
GOST R МЭК-61508 Functional safety of electrical, electronic.
МИ 2233-2000 Ensuring of Measurement Effectiveness for Process Control. General
Provisions.
ТР ТС 004/2011 Technical Regulations of the Customs Union on safety of low-voltage equipment.
ТР ТС 020/2011 Technical Regulations of the Customs Union Electromagnetic compatibility of technical means.
ТР ТС 020/2011 Technical Regulations of the Customs Union Electromagnetic compatibility of
technical means
IEC 60654-1-1993Industrial-process measurement and control equipment — Operating conditions — Part 1: Climatic conditions
IEC 60947-5-6- 1999Low-Voltage Switchgear and Controlgear — Part 5-6: Control Circuit Devices and Switching Elements — DC Interface for Proximity Sensors and Switching Amplifiers (NAMUR)
IEC 61000-6- 2-2018Electromagnetic compatibility (EMC) — Part 6-2: Generic standards — Immunity standard for industrial environments
IEC 61000-6-4-2018Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard for industrial environments
IEC 61131 Programmable Logic Controllers – Parts 2 and 3
IEC 61158 Digital data communications for measurement and control, fieldbus for use in industrial control system.
IEC 61508 Functional Safety of Electrical/Electronic/Programmable Electronic
Safety-Related Systems Parts 0-7
IEC 61511-1-2018 Functional Safety: Instrumented Systems for the Process Industry.
IEC 62264Enterprise Control System Integration.
IEC 62443-3-3-2020 Industrial communication networks — Network and system security.
IEC 62682-2014 Management of alarm systems for the process industries
ISA 71.01-1985 Environmental Condition for Process measurement and Control System: temperature and humidity.
ISA 71.04 Environmental Conditions for Process Measurementand Control Systems. Airborne Contaminants.
TIA-568.1Commercial Building Telecommunications Infrastructure Standard.
TIA-569 Commercial Building Standard for Telecommunications Pathways and
Spaces.
TIA-606 Administration Standard for the Telecommunications Infrastructure of Commercial Building.

3. Regulatory documentation for security requirements

Federal Law № 116-FZ.On Industrial safety of hazardous Production Facilities (as amended on June 11, 2021) (version effective from July 1, 2021).
Federal Law № 184-FZFederal Law No. 184-FZ. About technical regulation.
Federal Law от 30 .12. 2009 № 384-FZTechnical regulations on the safety of buildings and structures.
FZ от 04.05.1999 №96-FZAbout the protection of atmospheric air.
FZ от 21.07.2011 №256-FZOn the safety of fuel and energy complex facilities
FZ от 21.07.2014 №219-FZOn Amendments to the Federal Law «On Environmental Protection» and Certain Legislative Acts of the Russian Federation.
RF Government Ordinance от 13.03.2019 №262Resolution of the Government of the Russian Federation No. 262 of 13.03.2019. Rules for the creation and operation of an automatic control system for emissions of pollutants and (or) discharges of pollutants.
Приказ № 533 от 15 декабря 2020 года N 533About the approval of federal norms and rules in the field of industrial safety «General rules of explosion safety for explosion-and fire-hazardous chemical, petrochemical and oil refining industries»
Приказ № 778 от 26 декабря 2012About the approval of the Safety Manual for warehouses of liquefied petroleum gases and flammable liquids under pressure.
Приказ № 779 от 26.12.2012Safety Guide for flare systems
Приказ Минэнерго Россииот 13 января 2003 года N 6. ПТЭЭПPTEEP. Rules of technical operation of electrical installations of consumers.
GOST 12.1.003-2014 Occupational safety standards system. Noise. General safety requirements
GOST 12.1.005-88Occupational safety standards system. General sanitary requirements for working zone air
GOST 12.1.007-76Occupational safety standards system. Noxious substances. Classification and general safety requirements
GOST 12.1.010-76Occupational safety standards system. Explosion safety. General requirements.
GOST 12.1.019-17 Occupational safety standards system. Electrical safety. General requirements and range of protective means
GOST 12.1.030-81 Electrical safety protective grounding, neutral grounding.
GOST 12.1.030-81Occupational safety standards system. Electric safety. Protective conductive earth, neutralling.
GOST 12.2.007.0-75Occupation safety standards system. Electrical equipment. General safety requirements
GOST 12.2.063-2015Pipeline valves. General safety requirements
GOST 12.2.085-2017Pipeline valves. Safety valves. Selection and calculation of capacity
GOST 12.4.124-83.ССБТ
ССБТ. Occupational safety standards system. Means of the protection against static electricity . General technical requirements
GOST 14254-2015 (IEC 60529:2013) Classification of degree of protection by Enclosure.
GOST 21130-75 Electrical items. Earth terminals and earth signs. Design and dimensions.
GOST 30852.10-2002Electrical apparatus for explosive atmospheres. Part 11. Intrinsic safety 
GOST 30852.1-2002Explosionproof electrical equipment. Part 1. «Flameproof enclusure» type explosion protection.
GOST 30852.13-2002Explosionproof electrical apparatus. Part 14. Electrical installations in explosive gas atmospheres (other than mines)
GOST 30852.15-2002 (МЭК 60079-16:1990)Electrical apparatus for explosive gas atmospheres. Part 16. Artificial ventilation for the protection of analyzer(s) houses
GOST 30852.9-2002Electrical apparatus for explosive gas atmospheres. Part 10. Classification of hazardous areas
GOST 31441.1-2011 (EN 13463-1:2001)Non-electrical equipment for potentially explosive atmospheres. Part 1. General requirements
GOST 31610.0-2014(IEC 60079-0:2011),  GOST IEC 60079-1-2013.GOST R МЭК 60079-25-2012Electrical equipment for explosive gas environments.
GOST 31610.11-2014 (IEC 60079-11:2011)Explosive atmospheres. Part 11. Equipment with type of explosion protection «intrinsically safe electrical circuit «i»
GOST IEC 60079-14-2011Explosive atmospheres. Part 14. Electrical installations design, selection and erection
GOST IEC 60079-14-2013Explosive atmospheres. Part 14. Electrical installations design, selection and erection
GOST IEC 61241-3-2011 Electrical apparatus for use in the presence of combustible dust. Part 3. Classification of areas
GOST R МЭК 60079-7-2012Explosive atmospheres. Part 7. Equipment. Protection by increased safety «e»
GOST МЭК 60079-1-2011Explosive atmospheres. Part 1. Equipment protection by flameproof enclosures «d»
GOST МЭК 60079-2-2011Explosive atmospheres. Part 2. Equipment protection by pressurized enclosure «p»
GOST R 50571.22-2000Electrical installations of buildings. Part 7. Requirements for special installations or locations. Section 707. Earthing requirements for the installation of data processing equipment
GOST R 50571.5.54-2013 Electrical installations of buildings – Part 5-54: Selection and erection of electrical equipment – Earthing arrangements, protective conductors and protective bonding conductors
GOST R МЭК 60079-0-2011GOST R IEC 60079-0-2011. Explosive atmospheres – Part 0: Equipment – General
requirements.
GOST R МЭК 60079-27-2012 Explosive atmospheres – Part 27: Fieldbus intrinsically safe concept (FISCO).
МУ 2.6.1.2005—05Methodological guidelines. Determination of the category of potential danger of a radiation object.
НП 014-16Federal Norms and Rules in the field of the use of atomic energy «Rules for the investigation and accounting of violations during the operation and decommissioning of radiation sources, storage facilities for radioactive substances and radioactive waste and the handling of radioactive substances and radioactive waste».
НП-034-15On the approval of Federal Norms and Rules in the field of the use of atomic energy «Rules for the physical protection of radioactive substances, radiation Sources and storage facilities».
НП-038-16Federal norms and rules in the field of the use of atomic energy «General provisions for ensuring the safety of radiation sources»
НП-067-16On the approval of Federal Norms and Rules in the field of the use of atomic energy «Rules for the investigation and accounting of Violations during the operation and decommissioning of radiation Sources, storage facilities for radioactive substances and radioactive waste and the management of radioactive substances and radioactive waste»
НП-073-11On the approval of Federal Norms and Rules in the field of the use of atomic energy «Rules for the physical protection of radioactive substances and radiation Sources during their transportation»
РБ-064-20Guidelines for safety in the use of atomic energy «Recommendations on the composition and content of the report on the justification of the safety of radiation sources»
РМ 4-223-89RM 4-223-89. Process automation systems.Requirements for electric units of utomation systems in explosion hazardous areas.
СА 03-002-05Rostechekspertiza Association CA-03-002-05 “Systems of monitoring of hazardous industrial facilities’ equipment. General technical requirements”.
СанПиН 2.6.1.1281-03SANITARY RULES on radiation safety of personnel and the public during the nsportation of radioactive materials (substances)
СанПиН 2.6.1.2523-09Radiation safety standards NRB-99/2009
СанПиН 2.6.1.3287-15Sanitary and epidemiological requirements for the handling of radioisotope devices and their device.
СП 2.6.1.2612-10Basic sanitary rules for ensuring radiation safety (OSPORB-99/2010)
СП 51.13330.2011Sound protection
TP TC 010/2011Technical Regulations of the Customs Union On safety of machines and equipment
TP TC 032/2013Technical Regulations of the Customs Union «On the safety of equipment operating under excessive pressure»
ТР ТС 004/2011 Technical Regulations of the Customs Union On safety of low-voltage
equipment
ТР ТС 012/2011Technical Regulations of the Customs Union on safety of equipment for use in potentially explosive atmospheres.
ТР ТС 012/2011 Technical Regulations of the Customs Union On safety of equipment for use in potentially explosive atmospheres
ASME VIII-2021SECTION VIII — PRESSURE VESSELS SET — 3 VOLUMES (CONTAINS ASME SECTION VIII — DIVISION 1, DIVISION 2 AND DIVISION 3)

4. Regulatory documentation for documentation

Приказ Ростехнадзора от 26.12.2006 N 1128About the approval and introduction of requirements for the composition and procedure for maintaining executive documentation during construction, reconstruction, capital repairs of capital construction facilities and requirements for acts of inspection of works, structures, sections of engineering and technical support networks.
GOST 2.001-2013Unified system for design documentation. General principles
GOST 2.102-2013Unified system for design documentation. Types and sets of design documentation
GOST 2.104-2006Unified system for design documentation. Basic inscriptions
GOST 2.120-2013Unified system for design documentation. Technical design
GOST 2.701-2008Unified system for design documentation. Diagrams. Kinds and types. General requirements for fulfillment
GOST 2.702-2011Unified system of design documentation. Rules for presentation of electric schemes
GOST 2.708-81Unified system for design documentation. Rules for preparation of electric diagrams in digital computing technique 
GOST 2.755-87Unified system for design documentation. Graphic designations in electric diagrams. Commutational devices and contact connections 
GOST 2.781-96Unified system for design documentation. Graphic designations. Hydraulic and pneumatic valves, control devices and measuring instruments, indicators, switches
GOST 21.001-2013.СПДСSystem of design documents for construction. General principles
GOST 21.110-2013System of design documents for construction. Specification of equipment, products and materials
GOST 21.208-2013.СПДСSystem of design documents for construction. Industrial process automation. Instrumentation symbols for use in diagrams
GOST 21.408-2013 Rules for Execution of Detailed Documentation on Process Automation.
GOST 27.301-95 Dependability in technics.Dependability prediction. Basic principles.
GOST 27300-87Information measuring systems. General requirements, complete set and rules
of operation documentation composition
GOST 34.201-89Information technology. Set of standards for automated systems. Types, sets and indication of documents for automated systems making
GOST R 21.101-2020System of design documentation for construction. Main requirements for design and working documentation
GOST R 21.1101-2013System of design documents for construction. Rules of industrial process automation working documentation execution
РД 153-00.0-005-99The procedure for the development, coordination and approval of industry regulatory documents.
ISA 5.1-2009Instrument Symbols and Identification
ISA 5.2- 1976 Binary Logic Diagrams for Process Operation.
ISA 5.3-1983 Graphic Symbols for DCS Display.
ISA 5.4-1991  Instrument Loop Drawing.
ISA 5.5-1985 Graphic Symbols for Process Displays.

5. Regulatory documentation for cable products

GOST 12.2.007.14-75 ССБТCables and cable fittings. Safety requirements (with rev. 1,2).
GOST 12177-79 Cables, wires and cords. Design testing methods.
GOST 1508-78 Rubber and plastic insulated control cables. Technical specification (with rev.1-5).
GOST 15845-80 Cable articles. Terms and definitions.
GOST 22483-2012Conductors for cables, wires and cords
GOST 23585-79Mounting of electric radioelectronic equipment and instruments.
Technical requirements for wire screens termination and connection.
GOST 23587-96Electrical wiring of radio-electronic equipment and devices. Technical requirements
for termination of hookup wires and wire strand attachment.
GOST 26445-85Insulated power wires. General specifications  
GOST 31565-2012 Cable items. Fire safety requirements.
GOST 31947-2012Wires and cables for electrical equipment of rated voltages up to and including 450/750 V. General specifications 
GOST IЕС 60227-1-2011Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 1. General requirements 
GOST R 50509-93 (МЭК 371-72) Marking of insulated conductors.
GOST R МЭК 60794-1-22-2017, GOST R МЭК 60794-1-21-2020
Optical fibre cables. Part 1-22. Generic specification. Basic optical cable test procedures. Environmental test methods
МЭК 60228 -2004Conductors for cables, wires and cords
СТО 11233753-004-2011Automation systems. Installation of electrical wiring and fiber-optic lines. Installation of wires and cables.
IEC 61754-20-100-2012Fiber Optic Connector Interfaces -Part 20: Type LC Connector Family
TIA-568.0-2020Generic Telecommunications Cabling for Customer Premises

6. Regulatory documentation for control and measuring devices

GOST 12893-2005Single-seated, double-seated and cage control valves. General specifications.
GOST 15150-69 Machines, devices and other technical products. Versions for different climatic regions. Categories, conditions of operation, storage and transportation
in terms of the impact of climatic factors of the external environment.
GOST 17433-80Industries purity. Compressed air grades of contamination
GOST 18140-84SSI differential pressure gauges. General specifications.
GOST 23866-87SSI differential pressure gauges. General specifications.
GOST 2405-88Pressure gauges, vacuum gauges, pressure-and-vacuum gauges, draught gauges and draught-and-pressure gauges. General specifications
GOST 24856-2014Pipeline valves. Terms and definitions
GOST 33257-2015Pipeline valves. Methods of control and testing.
GOST 33259-2015Flanges for valves, fittings and pipelines for pressure to  250. Design, dimensions and general technical requirements.
GOST 9544-2015Pipeline valves. Leakage rates of valves
GOST R 50342-92Thermoelectric converters. General specifications.
GOST R 52931-2008
 Instruments for process monitoring and control. General specifications/
GOST R МЭК 60085-2011Electrical insulation. Thermal evaluation and designation
GOST R МЭК 61192. Печатные узлы. Требования к качеству.Soldered electronic assemblies. Workmanship requirements. Part 1. General technical requirements
РД 38.009-90 НПФ «Автоматика».Actuators of automatic control systems. The methodology for calculating the throughput, selecting the standard size and throughput characteristics.
РД 51-0220570-2-93Safety valves. Selection, installation and calculation.
Решение Комиссии Таможенного союза № 711 от 15 июля 2011 годаDecision of the Customs Union Commission No. 711 of July 15, 2011
СП 60.13330-2012Heating, ventilation and airconditioning.
СП 77.13330.2016Systems of automation. The staticized edition
СТО 11233753-001-2006Automation systems. Installation and commissioning.
TP ЕАЭС 037/2016On the restriction of the use of hazardous substances in electrical and radio electronics products.
API RP 551-2016Process Measurement Instrumentation.
API RP 556-2011Instrumentation & Control System for Fired Heaters and Steam Generation.
API RP-553-2012 Refinery valves and accessories for control and safety instrumented systems.
API STD 520 P1-2020 Sizing, Selection, and Installation of Pressure-relieving Devices Part I—Sizing and Selection.
API STD 520 P2Т -2020Sizing, Selection, and Installation of Pressure-relieving Devices Part II—Installation.
API STD 526-2017 Flanged Steel Pressure-relief Valves.
API STD 527-2020 Seat Tightness of Pressure Relief Valves.
API STD 607-2016Fire Test for Quarter-turn Valves and Valves Equipped with Nonmetallic Seats.
API STD 608-2020 Metal Ball Valves—Flanged, Threaded, and Welding Ends.
API STD 609-2021 Butterfly Valves: Double-flanged, Lug- and Wafer-type.
ASME B1.20.1-2013Pipe Threads, General Purpose (Inch).
ASME B16.10-2017Face-to-Face and End-to-End Dimensions of Valves.
ASME B16.25-2017Buttwelding Ends.
ASME B16.34-2020 Flanged, Threaded, and Welding End.
ASME B16.36-2020Orifice Flanges.
ASME B16.5-2020Pipe Flanges and Flanged Fittings NPS ½ Through NPS 24 Metric/Inch Standard.
ASME B46.1-2019Surface Texture (Surface Roughness, Waviness, and Lay).
ASME PTC 19.3-2016Thermowells. Performance Test Codes.
ASTM A262-2015Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
EN 10204-2005Metallic products — Types of inspection documents
EN 12266-1/2-2012Industrial valves — Testing of metallic valves — Part 1: Pressure tests, test procedures and acceptance criteria — Mandatory requirements.
EN 12569-1-2020Industrial valves — Valves for chemical and petrochemical process industry — Requirements and tests
EN 13190-2002Dial thermometers;
EN 50446-2007Straight thermocouple assembly with metal or ceramic protection tube and accessories
IEC 60050-351-2014NTERNATIONAL ELECTROTECHNICAL VOCABULARY — PART 351: CONTROL TECHNOLOGY
IEC 60529:2013 Degrees of Protection Provided by Enclosures.
IEC 60534.2.3-2015Industrial-process control valves – Part 2-3: Flow capacity – Test procedures
IEC 60534.8-2015Industrial-process control valves . Noise considerations
IEC 60654-1993  Industrial — process measurement and control equipment – Operating conditions – Parts 1 to 4.
IEC 61152-1992Dimensions of Metal-Sheathed Thermometer Elements.
IEC 61515-2016Mineral Insulated Thermocouple Cables and Thermocouples.
IEC 62262-2002Degrees of Protection Provided by Enclosures for Electrical Equipment Against External Mechanical Impacts (IK Code)
IEC-60584Thermocouples.
IEC-60751-2019 Industrial platinum resistance
thermometer Sensors
ISA 75.08.01-2016Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125, 150, 250, 300, and 600)
ISA 75.08.02-2003Face-to-Face Dimensions for Flanged and Flangeless Rotary Control Valves (Classes 150, 300, and 600, and PN 10, PN 16, PN 25, PN 40, PN 63 and PN 100)
ISA 75.25.01-2000Test Procedure for Control Valve Response Measurement from Step Inputs
ISO 148-1-2016Metallic materials — Charpy pendulum impact test — Part 1: Test method
ISO 15848-1INDUSTRIAL VALVES — MEASUREMENT, TEST AND QUALIFICATION PROCEDURES FOR FUGITIVE EMISSIONS — PART 1: CLASSIFICATION SYSTEM AND QUALIFICATION PROCEDURES FOR TYPE TESTING OF VALVES
ISO 5211-2017Industrial valves — Part-turn actuator attachments.
NACE MR 0103-2015 ( ISO 17945: 2015)Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments
NACE MR 0175-2015/ISO 15156Petroleum, petrochemical, and natural gas industries — Materials for use in H2S-containing environments in oil and gas production
NACE MR0103 Material Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments.

7. Regulatory documentation on metrology

102-FZ от 26.06.2008 (с изменениями от 08.12.2020) On ensuring the uniformity of measurements.
RF Government Ordinance № 1847 от 16 ноября 2020 года On approval of the list of measurements related to the sphere of state regulation of ensuring the uniformity of measurements.
RF Government Ordinance № 734 от 23 сентября 2010 годаAbout standards of units of quantities used in the field of state regulation of ensuring the uniformity of measurements.
RF Government Ordinance № 879 от
31 октября 2009
On the approval of the Regulations on the units of quantities allowed for use in the Russian Federation.
ПР 50.2.016-94Requirements for performing calibration work.
Приказ Минпромторга России N 2510 от 31 июля 2020 годаOn approval of the procedure for verification of measuring instruments, requirements for the verification mark and the content of the verification certificate.
Приказ Федерального агентства по Техническому регулированию и метрологии N 1339 от 29 июня 2018 About the approval of the state verification scheme for measuring instruments of excess pressure up to 4000 Mpa.
Приказ Федерального агентства по Техническому регулированию и метрологии N 2900About the approval of the State verification scheme for measuring instruments of absolute pressure in the range 1·10-1·10 Pa.
GOST 26.011-80Measuring and automation devices. Input and output current and voltage continuous signals
GOST 26.013-81Measurement and automation means. Input and output electrical signals
 with discrete change of parameters.
GOST 6651-2009 State system for ensuring the uniformity of measurements. Platinum, copper, and nickel resistance resistive temperature transducers. General requirements and test methods
GOST 8.009-84 State system for ensuring theuniformity of measurements. Standardizedmetrological characteristic of measuring instruments.
GOST 8.009-84 State System of Ensuring Uniform Measurement. Controlled metrological characteristics of measuring instruments.
GOST 8.187-76State system for ensuring the uniformity of measurements.  The State special standard and Аll-Union verification schedule for means of measurements of the difference of pressures up to 4·10 Pa
GOST 8.256-77 State System of Ensuring Uniform Measurement. Normalization and
determination of dynamic characteristics of analog measuring instruments. General
provisions.
GOST 8.417-2002 State system for ensuring the uniformity of measurements. Units of quantities
GOST 8.461-2009 State system for ensuring the uniformity of measurements. Platinum, copper and nickel resistive temperature transducers. Verification methods
GOST 8.558-2009State system for ensuring the uniformity of measurements. State verification schedule for means measuring temperature
GOST 8.578-2014State system for ensuring the uniformity of measurements. State hierarchy scheme for measuring instruments of the content of components in gaseous mediums
GOST 8.586.1-2005 Measurement of liquids and gases flow rate and quantity by differential pressure method orifice instruments
GOST 8.586.2-2005State system for ensuring the iniformity of measurements. Measurement
of liquids and gases flow rate and quantity by means of orifice instruments.
Part 2. Orifice plates. Technical requirements.
GOST 8.586.3-2005State system for ensuring the uniformity of measurements. Measurement of liquids
and gases flow rate and quantity by means of orifice instruments. Part 3. Nozzles and Venturi nozzles. Technical requirements
GOST 8.586.4-2005State system for ensuring the uniformity of measurements. Measurements of liquids
and gases flow rate and quantity by means of orifice instruments. Part 4. Venturi tubes. Technical requirements. 
GOST 8.586.5-2005State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure.
GOST ISO/IEC 17025-2019.General requirements for the competence of testing and calibration laboratories
GOST R 8.563-2009State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R 8.585-2001 State system for ensuring the uniformity of measurements. Thermocouples. Nominal static characteristics of conversion
GOST R 8.596-2002State system for ensuring the uniformity of measurements. Metrological assurance for measuring systems. Main principles.
GOST R 8.596-2002 State System of Ensuring Uniform Measurement. Metrological assurance for measurement systems. General provisions.
GOST R 8.654-2015State system for ensuring the uniformity of measurements. Requirements for software of measuring instruments. Main principles
GOST R 8.840-2013State system for ensuring the uniformity of measurements. State verification schedule for means measuring absolute pressure in the range 1 — 1·10 Pa.
GOST R 8.879-2014State system for ensuring the uniformity of measurements. Calibration techniques of measuring instruments. General requirements to the contents and statement.
GOST R 8.899-2015State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Verification of measurements procedure
МИ 140-89GSI. Vacuum meters. The verification method.
МИ 2124-90Recommendation. GSI. Pressure gauges, vacuum meters, manovacuummeters, pressure gauges, traction meters and traction meters showing and recording. Verification procedure.
МИ 2174-91Certification of algorithms and programs for data processing during measurements.
МИ 222-80 Calculation of Measurement Channel Metrological Characteristics using Metrological Characteristics of System Components.
МИ 2439-97 Metrological Characteristics of Measurement Systems. Nomenclature.
Principles of Regulation, Definition and Control.
МИ 2439-97GSI. Metrological characteristics of measuring systems. Nomenclature. Principles of regulation, definition and control.
МИ 2440-97Methods of experimental determination and control of error characteristics of measuring channels of measuring systems and measuring complexes.
МИ 3290-2010 Recommendation concerning preparation, registration and examination of sources by Testing for Approving of Chosen Type of Measurement System.
МИ 670-84Methodological guidelines. Determination of the needs of verification units in production resources.
ПМГ 96-2009State System for Ensuring Uniform Measurement. Measurement results
and quality characteristics. Presentation forms.
РД 153-00.0-005-99The industry system of the unity of measurements in the fuel and energy complex system. Metrological examination of draft regulatory documents in the fuel and energy complex system.
РД СМН 01-2015The procedure for organizing the activities of the System for assessing and confirming the competence of metrological services of legal entities in terms of internal metrological supervision.
Решение Коллегии ЕЭК N 89 от 26 июля 2016 года The procedure for organizing the verification of the measuring instrument.
РМГ 51-2002State system for ensuring the uniformity of measurements.Documents for verification methods of measuring instruments. Basic statements.
РМГ 51-2002State system for ensuring the uniformity of measurements. Documents for verification methods of measuring instruments. Basic statements.
РМГ 63-2003State System for Ensuring Uniform Measurement: Ensuring the efficacy of measurements at industrial process management. Metrological examination of
technical documentation.
РМГ 63-2003
State system for ensuring the uniformity of measurements. Ensuring the effect of measurements by the control of technological processes. Metrological examination of technical documents
ASME MFC 14M-2003Measurement of Fluid Flow Using Small Bore Precision Orifice Meters.
ASME PTC 19.3-1974 Temperature Measurement Instruments and Apparatus
IEC 60584-1-2013Thermocouples – Part 1: EMF specifications and tolerances.
IEC 60584-3-2021Thermocouples – Part 3: Extension and compensating cables – Tolerances and identification system.
ISO 10012-2003Measurement Management Systems — Requirements for Measurement Processes and Measuring Equipment.
ISO 2714-2017Liquid hydrocarbons — Volumetric measurement by displacement meter.
ISO 3966-2020Measurement of fluid flow in closed conduits — Velocity area method using Pitot static tubes.
ISO TR 15377-2018Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167.

8. Regulatory documentation on fire systems and gas systems

Federal Law of the Russian Federation No. 123-FZ of July 22, 2008 Technical regulation on fire safety requirements.
FZ от 21.12.1994 №69-FZFederal law. About fire safety (as amended on June 11, 2021).
Приказ № 533 от 15 декабря 2020 годаFederal norms and rules in the field of industrial safety «General rules of explosion safety for explosion-and fire-hazardous chemical, petrochemical and oil refining industries».
GOST 12.1.004-91Occupational safety standards system. Fire safety. General requirements.
GOST 12.1.018-93Occupational safety standards system. Fire and explosion safety of static electricity.
General requirements
GOST 31565-2012  Cable items. Fire safety requirements.
GOST IEC 60331-12-2013 (IEC 60331-12)Testing of electrical cables under the influence of flame. Maintaining working capacity. Part 12. Test equipment. Exposure to a flame with a temperature of at least 830 ° C simultaneously with a mechanical shock. The action is terminated from 01.01.2022.
GOST IEC 60331-21-2011Tests for electric and optical fibre cables under fire conditions. Circuit integrity. Procedures and requirements. Cables of rated voltage up to and including 0,6/1,0 kV
GOST IEC 60332-3-21-2011 (IEC 60332-3-21)Tests on electric and optical cables under fire conditions. Part 3-21. Flame spread of vertically-mounted bunched wires or cables. Category A F/R.
GOST IEC 60332-3-22-2011 Tests on electric and optical fiber cables under fire conditions. Test for vertical flame spread of verticallymounted bunched wires or cables. Category A.
GOST IEC 60754-1-2015Test on gases evolved during combustion of materials from cables. Part 1. Determination of the halogen acid gas content.
GOST IEC 60754-2-2015 Test on cable material of construction under fire conditions. Determination of acidity of gases evolved during combustion with pH and specific conductivity measurement.
GOST МЭК 60332-3-21-2011 (МЭК 60332-3-21) Tests on electric cables under fire conditions. Part 3-21. Test for vertical flame spread of vertically-mountedbunched wires or cables. Category A F/R.
GOST МЭК 60332-3-22-2011 (МЭК 60332-3-22)Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A.
GOST МЭК 60754-1-2015Test on cable material of construction under fire conditions.
Determination of the amount of halogen acid gas.
GOST МЭК 60754-2-2015Tests on gases evolved during combustion of materials from cables. Part 2. Determination of acidity (by pH measurement) and conductivity
GOST МЭК 61034-1-2011Measurement of smoke density of cables burning under defined conditions. Part 1. Test apparatus
GOST МЭК 61034-2-2011Measurement of smoke density of cables burning under defined conditions. Part 2. Test procedure and requirements.
GOST R 12.3.047-2012Occupational safety standards system. Fire safety of technological processes. General requirements. Methods of control
GOST R 51043-2002Automatic water and foam fire fighting systems. Sprinklers, spray nozzles and water mist nozzles. General technical requirements. Test methods
GOST R 52350.29.2-2010 (МЭК 60079-29-2:2007)Explosive atmospheres. Part 29-2. Gas detectors. Requirements for selection, installation, use and maintenance of detectors for flammable gases and oxygen
GOST R 52435-2015Alarm intruder technical means. Classification. General technical requirements and test methods
GOST R 53310-2009Through penetration for cables, hermetic inputs and through penetration of electric current types. Requirements of fire safety. Fire resistance test methods
GOST R 53311-2009Coatings cables fire retardant. Methods for determination of fireproof efficiency
GOST R 53325-2012 Fire-fighting equipment.Technical devices of fire-fighting automation. General technical requirements and testing methods.
GOST R МЭК 60332-3-10- 2015 (IEC 60332-3-10)Tests on electric and optical fibre cables under fire conditions. Part 3-10. Test for vertical flame spread of vertically-mounted bunched wires or cables. Apparatus.
НПБ 110-03The list of buildings, structures, premises and equipment subject to protection by automatic fire extinguishing installations and automatic fire alarm systems. (Approved by the order of the Ministry of Emergency Situations of June 18, 2003 N 315).
РД 25.953-90 Automatic Systems of Firefighting, Fire, Security and Security and Fire Alarms. Graphic Code for Communications Elements.
РД 78.145-93 «Protection, fire and fire safety alarm systems and complexes. Rules of production and acceptance of works».
СП 10.13130.2020Fire protection system. Installation of standpipe and hose systems. Designing and regulations rules
СП 12.13130.2009Determination of categories of rooms, buildings and external installations on explosion and fire hazard
СП 155.13130.2014Warehouses of oil and oil products. Fire safety requirements
СП 3.13130.2009Systems of fire protection. System of annunciation and management of human evacuation at fire. Requirements of fire safety
СП 484.1311500.2020Fire alarm systems and automation of fire protection systems. Designing and regulations rules
СП 485.1311500.2020Automatic fire-extinguishing systems. Designing and regulations rules.
СП 486.1311500.2020The list of buildings, structures, premises and equipment, subject to protection by automatic extinguishing and fire alarm systems
СП 6.13130.2021Fire protection system. Electrical installations low-voltage. Fire safety requirements. The date of introduction is 2021-10-06.
СП 7.13130.2013 Fire Protection Systems. Heating, Ventilation And Air-Conditioning, Fire Requirements.
СП 7.13130.2013Heating, ventilation and conditioning. Fire safety requirements.
СП 8.13130.2020The fire protection systems. Outdoor fire-fighting water supply. Fire safety requirements
ТР ЕАЭС 043/2017Technical Regulations of the Eurasian Economic Union «On requirements for fire safety and Fire Extinguishing means».
ТУ-ГАЗ-86Requirements for the installation of alarms and gas analyzers
API RP 2218-2013 Fire Proofing Practices inPetroleum and Petrochemical Processing Plants.
ISA 18.1-1979 Annunciator Sequences and Specifications

9. Regulatory documentation by technology

GOST 2939-63 Gases. Conditions for determination of volume .
GOST 31385-2016Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 34347-2017Steel welded vessels and apparatus. General specifications
GOST ИСО 10816-1-97Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 1. General guidelines
GOST ИСО 10816-3-2002Vibration. Evaluation of machine vibration by measurements on non-rotating parts.
Part 3. Industrial machines with nominal power above 15 kW and nominal speeds
between 120 r/min and 15000 r/min
GOST МЭК 60034-5-2011Rotating electrical machines. Part 5. Classification of protection degrees provided by the integral design of rotating electrical machines (IP code)
GOST R 53563-2009Condition monitoring and diagnostics of machines. Hazardous equipment
monitoring. Organizational procedures
GOST R 53564-2009Condition monitoring and diagnostics of machines. Hazardous equipment monitoring. Requirements for monitoring systems
GOST R 54522-2011High pressure vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindric shells, heads, flanges, covers. Design recommendations
GOST R 56233-2014Condition monitoring and diagnostics of machines. Hazardous equipment monitoring. Vibration generated by land-based reciprocating compressors
API RP 540-1999 Electrical Installations in Petroleum Processing Plants.
API STD 2000-2014 Venting Atmospheric and Low-pressure Storage Tanks.
API STD 521-2020 Pressure-relieving and Depressuring Systems.
API STD 670 Machinery Protection System
ASME B31.3-2020Process Piping